Configuration Guide: RubiQ 1.0 & 1.5 – PCS Digital Resources

Follow these steps to set up your RubiQ 1.0 or 1.5

Sold prior to April 2018
Vertical, red and black motor connectors
Only compatible with INAV 1.6.2

Course Content

Download INAV Sample Lesson

Reset Default Configuration Sample Lesson

Connect to INAV Sample Lesson

Step 1. Bind the RX Sample Lesson

Step 2. Verify RX Channels Sample Lesson

Step 3a. Verify AUX Channels Sample Lesson

Step 3b. Verify Failsafe Sample Lesson

Step 4. Configure Switches Sample Lesson

Step 5. Verify LEDs Sample Lesson

Step 6. Verify Motor Rotation Sample Lesson

Step 7. Calibrate ESC’s Sample Lesson

Step 8. Calibrate Accelerometer Sample Lesson

Step 9. Set Magnetic Declination Sample Lesson

Pre-Arming Check Sample Lesson

Before Going Outside Sample Lesson

Flight Test Sample Lesson

Post-Flight Inspection Sample Lesson